Retailer Exclusive
NEW
Model Number
4000F
Run Time
30 mins
Warranty
3 Years
Money Back Guarantee
90 Days
ZeroGap™ Technology
CrossWave OmniForce™ Edge Professional delivers zero-millimetre gap edge cleaning so you can clean all the way to the baseboards.
One Machine, Twice the Clean
Vacuum and mop together or powerfully vacuum alone with 75% more suction*. CrossWave OmniForce™ Edge Professional is the first and only wet dry vac with a dedicated dry vacuuming mode. It's our most powerful cordless CrossWave yet.
Cordless All-in-One Cleaning
Vacuum and wash sealed hard floors and area rugs - all in one easy step, all without the cord!
75% More Suction*
Vacuum and mop together for up to 30 minutes in Power Mop Mode, or powerfully vacuum alone with 75% more suction* in Power Vac Mode. CrossWave OmniForce™ Edge Professional is the first and only wet dry vac with a dedicated dry vacuuming mode.
ZeroGap™ Technology
CrossWave OmniForce™ Edge Professional delivers zero-millimetre gap edge cleaning so you can clean all the way to the baseboards.
Power Vac Mode
Remove dry debris, hair, and pet fur with 75% more suction power* with a dedicated dry vacuuming mode.
Power Mop Mode
Tackle cereal and milk, muddy foot prints, pet accidents, spilt drinks, and other wet and dry messes at the same time.
Fully Automatic
Automatically dispenses the right amount of water & cleaning solution in Power Mop Mode with no trigger to hold.
Tangle-Free Technology
The patented multi-surface brush roll and powerful suction minimises hair wrap and clogs with built-in Tangle-Free Technology.
Automatic Self-Cleaning Cycle
One-touch self-cleaning cycle to refresh the brush roll, flush out dirty debris, and help maintain machine performance.
Multi-Surface Cleaning
The multi-surface brush roll lets you effortlessly vacuum and wash across sealed hard floors and area rugs. Simply switch between modes using the intuitive digital controls and LCD display.
CrossWave OmniForce™ Edge Professional
Multi-Surface Pet Formula (236ml Sample)
Hard Floor Sanitise Formula (236ml Sample)
Wood Floor Formula (236ml)
2X ZeroGap™ Multi-Surface Brush Rolls
(1X pre-installed)
FreshStart Antimicrobial Washable Filter
Charging Dock
Model
4000F
Colour
Black, Titanium, Copper Harbour
Battery
25V
Run Time
Up to 30 minutes
Recharge Time
4 hours
Weight
4.8kgs
Water Tank Capacity
620ml
Dirt Tank Capacity
450ml
Surface Cleaning
Sealed Hard Floors - including Tile, Sealed Timber, Laminate, Marble, Polished Concrete, Vinyl, Engineered Flooring, Hybrid Floors, Bamboo, and Soft Floors like Low-Pile Area Rugs and Low-Pile Carpets.
Swivel Head
Yes
Cleaning Path Width
30.5 cms
Noise Level
69 dBA in Power Mop Mode, 74 dBA in Power Vac Turbo Mode
Warranty
3 Years + 90 Day Money Back Guarantee
Yes. Vacuum and mop together for up to 30 minutes in Power Mop Mode, or powerfully vacuum alone with 75% more suction in Power Vac Mode. CrossWave OmniForce™ Edge is the first and only wet dry vac with a dedicated dry vacuuming mode.
Yes. CrossWave OmniForce™ Edge is a cordless machine running on a rechargable 25V battery giving up to 30 minutes run time on a single charge.
CrossWave OmniForce™ Edge is suitable for use on all sealed hard floors. If you can use a mop and bucket or spray mop on your floors without issue, it would broadly be safe to assume you can use a CrossWave. CrossWave OmniForce™ Edge only releases approximately 1 tablespoon of water per square metre when used as directed in Power Mop Mode. If unsure, it is recommended to perform a test patch in a discreet area first.
Yes. You can use CrossWave OmniForce Edge to to dry vacuum all floors in Power Vac Mode, and to lightly refresh low-pile rugs / low-pile carpets by selecting the Power Mop Mode.
You can clean the Crosswave OmniForce™ Edge brush roll by activating the automatic Self-Clean Cycle while docked in the supplied 3 in 1 Docking Station.
Your brush may also be cleaned by hand by removing it from the machine and squeezing it while under running water.
Please refer to your User Guide for thorough instructions on cleaning your CrossWave OmniForce™ Edge brush roll.
CrossWave OmniForce™ Edge Professional is compatible with any BISSELL formula labelled for use in CrossWave machines. Do not use anything other than tap water mixed with BISSELL CrossWave formula, or plain tap water, in your machine.
CrossWave OmniForce™ Edge Professional automatically dispenses clean water and formula while it vacuums and mops the floor in Power Mop Mode. On average, it will use 1 tablespoon of water per square metre. The floor will be less wet compared to regular mopping, as the vacuum action sucks up excess water. Most floors will dry within a five minutes. If you do not wish to have the machine output water, simply switch it to Power Vac Mode.
Replace your CrossWave filter once every 3 - 4 months. Replace your CrossWave brush roll once every six months, or as needed. Spare filters and brush rolls can be purchased from leading electrical retailers and the BISSELL website.
BISSELL invented and released the CrossWave multi-surface hard floor washer in 2016, meaning we're the most experienced brand in this category of cleaner. CrossWave is the first of its kind to truly vacuum, wash, and sanitise hard floors at the same time. Specifically, CrossWave OmniForce™ Edge Professional is the first and only wet dry vac with a dedicated dry vacuuming mode. Select CrossWave models can even refresh area rugs and low-pile carpets, making them a true multi-surface cleaning system. Imitators from other brands tend to just sweep the floor, are generally limited to cleaning hard floors only, do not feature BISSELL's patented tangle-free brush roll, and do not sanitise. We're so confident you will love your CrossWave, we offer a 60-Day Money Back Guarantee with select models.
Compatible Formulas
On Sale
NEW
On Sale
Bulk & Save
On Sale
Bulk & Save
On Sale
Bulk & Save
On Sale
Bulk & Save
On Sale
Bulk & Save
On Sale
Accessories & Spare Parts
Sold Out
Sold Out
