Vacuum, Wash & Sanitise at the Same Time
Save time by vacuuming and washing at the same time! Clean and sanitise with included Hard Floor Sanitise formula to eliminate 99.9% of bacteria*.
Never Clean with Dirty Water Again
CrossWave HF3 automatically dispenses just the right amount of water and cleaning solution onto the floor. Unlike traditional mops, the clean and dirty water never mix thanks to the Two-Tank Technology.
Vacuum and wash multiple hard floor surfaces, all in one easy step!
Automatically dispense cleaning solution in just the right amount onto the floor with no trigger to hold.
Clean and sanitise with included Hard Floor Sanitise formula to eliminate 99.9% of bacteria.
Automatic self-cleaning at the touch of a button.
Enjoy quiet and powerful cleaning for 25 minutes without the cord. Self-propelled steering making it easier to manoeuvre the machine while you clean.
CrossWave HF3 Professional
2X Hard Surface Sanitise Formula (236ml Sample)
Multi-Surface Pet Formula (236ml Sample)
2X Hard Floor Brush Rolls
(1X pre-installed)
2X Washable Filters
(1X pre-installed)
Clean Out Brush & Strainer
Self-Cleaning & Charging Dock
3639H
Copper Harbour
22.2V
Up to 25 minutes
4 hours
3.99kgs
520ml
420ml
Sealed Hard Floors - including Tile, Sealed Timber, Laminate, Marble, Polished Concrete, Vinyl, Engineered Flooring, Floating Floors.
Yes
3 Years + 90 Day Money Back Guarantee
No. CrossWave HF3 Professional automatically vacuums and mops simultaneously, and does not have a vacuum-only mode.
No. CrossWave HF3 is for hard floor cleaning only.
Remove the clean water tank from your machine. You will then see a round rubber circle. Please press that in with your finger, or a pen, and lift the handle off at the same time.
You can clean the Crosswave brush roll by activating the automatic Self-Clean Cycle while docked on the charging base.
Your brush may also be cleaned by hand by removing it from the machine and squeezing it while under running water.
Please refer to your User Guide for thorough instructions on cleaning your CrossWave brush roll.
To maintain best cleaning performance, we recommend to change the CrossWave filter every 3-4 months. Filters are available at leading electrical retailers, and through our website.
Ensure you are only putting lukewarm tap water (not hot or boiling) in the tank along with CrossWave compatible formula. Failing to do so can warp your tank, and erode the tank seals. If you need a new tank, you can order them from the BISSELL website.
The functions, included accessories, warranty, suction motor strength, and other features can differ between models. To find the right machine for you, use our website's compare function to compare up to three products at a time. Look for the 'Compare' or 'Compare this product' buttons.
BISSELL invented and released the CrossWave multi-surface hard floor washer in 2016, meaning we're the most experienced brand in this category of cleaner. CrossWave is the first of its kind to truly vacuum, wash, and sanitise hard floors at the same time. Select CrossWave models can even refresh area rugs and low-pile carpets, making them a true multi-surface cleaning system. Imitators from other brands tend to just sweep the floor, are generally limited to cleaning hard floors only, do not feature BISSELL's patented tangle-free brush roll, and do not sanitise. We're so confident you will love your CrossWave, we offer a Money Back Guarantee with select models.
Troubleshooting Guides
Assembly & First Use
Cleaning & Maintenance
Troubleshooting No Spray
Troubleshooting Brush Not Spinning
Troubleshooting Dirty Water Tank Icon Flashing
Troubleshooting Leaving Streaks
Troubleshooting No Suction
Troubleshooting No Power