Brush Belt to Pump, Cogged, for Revolution HydroSteam (1634216)

To replace the brush rolls and belts, follow these instructions:

• Unplug machine and remove both tanks. While reclined, lay machine on its front.
• Remove belt cover. Use Phillips-head screwdriver to remove three screws.
• Use Phillips-head screwdriver to remove two screws. Then remove brush roll assembly by unhooking belt.
• If flat belt is broken, place a new belt around red pulley. Stretch belt toward back of machine and around metal shaft.
• If brushroll belts or brushroll assembly is broken, replace with new brushroll assembly.
• Reinstall brushroll assembly, making sure to loop belt over the shaft. Reinstall belt cover.